Your search

The fifth Sustainable Development Goal of the United Nations targets achieving gender equality by 2030, but recent progress has been sluggish. Gender inequalities in the labor markets may have been exacerbated by the Covid-19 recession. This paper aims to investigate the effects of the Covid-19 pandemic on gender inequalities in the labor markets by...

<jats:p>Antibiotic pollution poses a serious environmental concern worldwide, posing risks to ecosystems and human well-being. Transforming waste activated sludge into adsorbents for antibiotic removal aligns with the concept of utilizing waste to treat waste. However, the adsorption efficiency of these adsorbents is currently limited. This study identified KOH modification as the most effective method for enhancing tetracycline (TC) adsorption by sludge biochar through a comparative analysis of acid, alkali, and oxidant modifications. The adsorption characteristics of TC upon unmodified sludge biochar (BC) as well as KOH-modified sludge biochar (BC-KOH) were investigated in terms of equilibrium, kinetics, and thermodynamics. BC-KOH exhibited higher porosity, greater specific surface area, and increased abundance of oxygen-based functional groups compared to BC. The TC adsorption on BC-KOH conformed the Elovich and Langmuir models, with a maximum adsorption capacity of 243.3 mg/g at 298 K. The adsorption mechanisms included ion exchange, hydrogen bonding, pore filling, and electrostatic adsorption, as well as π-π interactions. Interference with TC adsorption on BC-KOH was observed with HCO3−, PO43−, Ca2+, and Mg2+, whereas Cl−, NO3−, and SO42− ions exhibited minimal impact on the adsorption process. Following three cycles of utilization, there was a slight 5.94% reduction in the equilibrium adsorption capacity, yet the adsorption capacity remained 4.5 times greater than that of unmodified sludge BC, underscoring its significant potential for practical applications. This research provided new insights to the production and application of sludge biochar for treating antibiotic-contaminated wastewater.</jats:p>

Facial expression recognition (FER) is essential for discerning human emotions and is applied extensively in big data analytics, healthcare, security, and user experience enhancement. This paper presents an empirical study that evaluates four existing deep learning models—VGG16, DenseNet, ResNet50, and GoogLeNet—utilizing the Facial Expression Recognition 2013 (FER2013) dataset. The dataset contains seven distinct emotional expressions: angry, disgust, fear, happy, neutral, sad, and surprise. Each model underwent rigorous assessment based on metrics including test accuracy, training duration, and weight file size to test their effectiveness in FER tasks. ResNet50 emerged as the top performer with a test accuracy of 69.46%, leveraging its residual learning architecture to effectively address challenges inherent in training deep neural networks. Conversely, GoogLeNet exhibited the lowest test accuracy among the models, suggesting potential architectural constraints in FER applications. VGG16, while competitive in accuracy, demonstrated lengthier training times and a larger weight file size (512MB), highlighting the inherent balance between model complexity and computational efficiency.

The objective is to assess whether the extent to which employee resilience and organizational culture would be significantly related to and statistically predict the three facets of employee work engagement. Resilience was measured by four facets (Determination, Endurance, Adaptability, and Recuperability); and Organization Culture was measured for three types (Bureaucratic, Innovative, and Supportive). The dependent measures were the three facets of Work Engagement (Cognitive, Emotional, and Physical). This research by questionnaire was conducted in 2023. The questionnaires completed by 316 full-time workers revealed that all four facets of employee resilience had significant positive correlations with all three types of work engagement. Also, all three facets of work engagement were significantly higher in Innovative and Supportive cultures compared to Bureaucratic cultures. The regression analyses performed showed that the resilience factors of Determination and Adaptability were strong positive predictors of all three facets of work engagement. Furthermore, Innovative culture had additional positive effects on all three facets of work engagement; while Supportive culture had an additional positive effect on Emotional Work Engagement. The implications of the results for management are also discussed in this paper.

<jats:title>Abstract</jats:title><jats:p>This research unveils to predict consumer ad preferences by detecting seven basic emotions, attention and engagement triggered by advertising through the analysis of two specific physiological monitoring tools, electrodermal activity (EDA), and Facial Expression Analysis (FEA), applied to video advertising, offering a twofold contribution of significant value. First, to identify the most relevant physiological features for consumer preference prediction. We integrated a statistical module encompassing inferential and exploratory analysis tools, which identified emotions such as Joy, Disgust, and Surprise, enabling the statistical differentiation of preferences concerning various advertisements. Second, we present an artificial intelligence (AI) system founded on machine learning techniques, encompassing k‐Nearest Neighbors, Support Vector Machine, and Random Forest (RF). Our findings show that the RF technique emerged as the top performer, boasting an 81% Accuracy, 84% Precision, 79% Recall, and an F1‐score of 81% in predicting consumer preferences. In addition, our research proposes an eXplainable AI module based on feature importance, which discerned Attention, Engagement, Joy, and Disgust as the four most pivotal features influencing consumer ad preference prediction. The results indicate that computerized intelligent systems based on EDA and FEA data can be used to predict consumer ad preferences based on videos and effectively used as supporting tools for marketing specialists.</jats:p>

<jats:p>In this study, sixteen Sprague Dawley (SD) female rats and eight SD male rats were co-housed to mate. Pregnant SD female rats were fed with a control diet or an MA diet. Breast milk, maternal ileum, and intestinal samples of the offspring were collected at the day of birth and ten days afterwards. The results showed that the impact of MA was more obvious on the microbiota of mature milk (p = 0.066) than on that of colostrum. In addition, MA additive did not significantly affect maternal ileal microbiota, but affected offsprings’ colonic microbiota significantly ten days after birth (p = 0.035). From the day of giving birth to ten days afterwards, in addition to the increase in microbial richness and diversity, at genus level, the dominant bacteria of breastmilk changed from Pseudomonas veronii to Bacillus and Lactococcus. Different from breastmilk microbiota, ten days after giving birth, the maternal ileal microbiota and the offsprings’ intestinal microbiota were dominated by Lactobacillus. Instead of ileal microbiota, offsprings’ colonic microbiota is a key action site of maternal MA additive. Therefore, the current findings have significant implications for the development of maternal feed aimed at modulating the intestinal microbiota of offspring, ultimately leading to improved health outcomes for both mothers and their offspring.</jats:p>

The origins of neutrino masses is one of the biggest mysteries in modern physics since they are beyond the realm of the Standard Model. As massive particles, neutrinos undergo flavor oscillations throughout their propagation. In this paper we show that when a neutrino oscillates from a flavor state {\alpha} to a flavor state \b{eta}, it follows three possible paths consistent with the Quantum Yang- Baxter Equations. These trajectories define the transition probabilities of the oscillations. Moreover, we define a probability matrix for flavor transitions consistent with the Quantum Yang-Baxter Equations, and estimate the values of the three neutrino mass eigenvalues within the framework of the triangular formulation.

<jats:p>To comply with the United Nations Sustainable Development Goals (UN SDGs), in particular with SDG 3, SDG 11, and SDG 13, a reliable air pollution prediction model must be developed to construct a sustainable, safe, and resilient city and mitigate climate change for a double win. Machine learning (ML) and deep learning (DL) models have been applied to datasets in Macau to predict the daily levels of roadside air pollution in the Macau peninsula, situated near the historical sites of Macau. Macau welcomed over 28 million tourists in 2023 as a popular tourism destination. Still, an accurate air quality forecast has not been in place for many years due to the lack of a reliable emission inventory. This work will develop a dependable air pollution prediction model for Macau, which is also the novelty of this study. The methods, including random forest (RF), support vector regression (SVR), artificial neural network (ANN), recurrent neural network (RNN), long short-term memory (LSTM), and gated recurrent unit (GRU), were applied and successful in the prediction of daily air pollution levels in Macau. The prediction model was trained using the air quality and meteorological data from 2013 to 2019 and validated using the data from 2020 to 2021. The model performance was evaluated based on the root mean square error (RMSE), mean absolute error (MAE), Pearson’s correlation coefficient (PCC), and Kendall’s tau coefficient (KTC). The RF model best predicted PM10, PM2.5, NO2, and CO concentrations with the highest PCC and KTC in a daily air pollution prediction. In addition, the SVR model had the best stability and repeatability compared to other models, with the lowest SD in RMSE, MAE, PCC, and KTC after five model runs. Therefore, the results of this study show that the RF model is more efficient and performs better than other models in the prediction of air pollution for the dataset of Macau.</jats:p>

The cosmological constant is normally introduced as an additional term entering the Einstein–Hilbert (EH) action. In this letter, we demonstrate that, instead, it appears naturally from the standard EH action as an invariant term emerging from spacetime symmetries. We then demonstrate that the same constraint emerging from this invariant suppresses the short wavelength modes and it favors the long wavelength ones. In this way, inside the proposed formulation, the observed value for the vacuum energy density is obtained naturally from the zero-point quantum fluctuations.

The mutual information method has demonstrated to be very useful for deriving the potential order parameter of a system. Although the method suggests some constraints which help to define this quantity, there is still some freedom in the definition. The method then results inefficient for cases where we have order parameters with a large number of constants in the expansion, which happens when we have many degenerate vacuums. Here, we introduce some additional constraints based on the existence of broken symmetries, which help us to reduce the arbitrariness in the definitions of the order parameter in the proposed mutual information method.

The aim of this study is to examine the online learning experiences of university students with Special Educational Needs (SEN), and how their experiences might differ from their typically developing peers. Fifty typically developing students (mean age = 22; 29 females) and 31 students with SEN (mean age = 22; 15 females) from a local

<jats:p>The mass production of uniform, high-quality polymer nanofibers remains a challenge. To enhance spinning yield, a multi-string standing wave electrospinning apparatus was developed by incorporating a string array into a standing wave electrospinning device. The process parameters such as string spacing, quantity, and phase difference were optimized, and their effects on the electric field distribution within the spinning area were analyzed using electric field simulations. When the string spacing was less than 40 mm or the number of strings exceeded two, the electric field strength significantly decreased due to electric field interference. However, this interference could be effectively mitigated by setting the string standing wave phase difference to half a period. The optimal string array parameters were identified as string spacing of 40 mm, two strings, and a phase difference of half a period. Multi-string standing wave electrospinning produced fibers with diameters similar to those obtained with single-string standing wave electrospinning (178 ± 72 nm vs. 173 ± 48 nm), but the yield increased by 88.7%, reaching 2.17 g/h, thereby demonstrating the potential for the large-scale production of nanofibers. This work further refined the standing wave electrospinning process and provided valuable insights for optimizing wire-type electrospinning processes.</jats:p>

Theories and models try to describe the complexity of how people embrace and make use of innovations. The determinants of behavior concerning battery electric vehicles (BEVs) have traditionally revolved around factors such as vehicles’ price and range. Surprisingly, despite being small and one of the wealthiest territories in the world, Macau SAR faces challenges in BEV market penetration, underscoring the need to explore alternative causes of behavioral intention. To explain the adoption of technologies, this paper focuses on technology show-off (TS), which combines Rogers’ (2003) concepts of visibility and trialability of technology in a single construct as a determinant of behavioral intention. Therefore, when individuals perceive technology as more visible and available for trial, their behavioral intention to adopt it strengthens. Using structural equation modeling for quantitative analysis, this study examines the significance of TS in terms of the intention to adopt battery electric vehicles. The findings highlight the salience of the technology show-off construct in explaining behavioral intention, underscoring its significance in the context of modern society’s characteristics. This study contributes to advances in understanding technology acceptance and highlights the importance of incorporating experiential aspects (such as TS) into the traditional technology acceptance models.

<jats:p>Detecting emotions is a growing field aiming to comprehend and interpret human emotions from various data sources, including text, voice, and physiological signals. Electroencephalogram (EEG) is a unique and promising approach among these sources. EEG is a non-invasive monitoring technique that records the brain’s electrical activity through electrodes placed on the scalp’s surface. It is used in clinical and research contexts to explore how the human brain responds to emotions and cognitive stimuli. Recently, its use has gained interest in real-time emotion detection, offering a direct approach independent of facial expressions or voice. This is particularly useful in resource-limited scenarios, such as brain–computer interfaces supporting mental health. The objective of this work is to evaluate the classification of emotions (positive, negative, and neutral) in EEG signals using machine learning and deep learning, focusing on Graph Convolutional Neural Networks (GCNN), based on the analysis of critical attributes of the EEG signal (Differential Entropy (DE), Power Spectral Density (PSD), Differential Asymmetry (DASM), Rational Asymmetry (RASM), Asymmetry (ASM), Differential Causality (DCAU)). The electroencephalography dataset used in the research was the public SEED dataset (SJTU Emotion EEG Dataset), obtained through auditory and visual stimuli in segments from Chinese emotional movies. The experiment employed to evaluate the model results was “subject-dependent”. In this method, the Deep Neural Network (DNN) achieved an accuracy of 86.08%, surpassing SVM, albeit with significant processing time due to the optimization characteristics inherent to the algorithm. The GCNN algorithm achieved an average accuracy of 89.97% in the subject-dependent experiment. This work contributes to emotion detection in EEG, emphasizing the effectiveness of different models and underscoring the importance of selecting appropriate features and the ethical use of these technologies in practical applications. The GCNN emerges as the most promising methodology for future research.</jats:p>

Social Media Influencer (SMI) marketing represents a contemporary addition to the arsenal of digital advertising tools. Digital Content Creators are individuals who regularly share a variety of content, including visuals, audio recordings, and updates, across multiple social media platforms to shape consumers' perceptions of a brand and its products. The focus of this study is to examine how the credibility aspects of social media influencers (expertise, attractiveness, and trustworthiness) influence purchase intention and brand intimacy while also considering the mediating role of consumer engagement. This study used a quantitative, cross-sectional design with convenience sampling targeting social media-active individuals. Data were collected via a questionnaire distributed through email and social media, selecting participants who followed influencers. To gather data, 250 participants were engaged in an online questionnaire distributed via Google Forms. The findings indicate that the credibility dimensions of SMIs, particularly their attractiveness and trustworthiness, positively influence brand intimacy and purchase intention. Furthermore, consumer engagement serves as a critical mediator, connecting the authenticity of social media influencers with purchase intention and brand intimacy. In line with these results, it becomes evident that consumer engagement indirectly influences influencer credibility (trustworthiness and attractiveness), purchase intention, and brand intimacy. Notably, expertise does not exert any discernible impact on either brand intimacy or purchase intention. This study's outcomes provide valuable insights for marketing managers, underscoring the significance of partnering with influencers who possess a high level of trust within their respective marketing niches.